Below is information and knowledge on the topic gap behind slide in range gather and compiled by the monanngon.net team. Along with other related topics like: Gap between back of stove and wall, KitchenAid Gap Filler for Slide-In Range, Slide-in Range Rear Filler Kit in Black, Stovetop Extender for back of stove.
ut in the Gap Behind a Slide-In Range – House Practical
Slide-in ranges are meant to sit flush against the wall of your kitchen. Sometimes, however, there can be a gap behind your stove. Bits of food and ingredients (or even splashes of oil) can fall through this gap, creating an unhygienic problem you have to deal with.
To cover this gap behind a slide-in range, you can use or install things such as small space fillers (e.g. caulk, plastic tubing), backsplash, countertop, pre-made gap fillers, and a kitchen shelf.
This article goes over the various solutions to fill the gap behind a slide-in range, whether a countertop is required behind the range, and how large the gap should be between your stove and wall.
How To Fill the Gap Between Your Stove and the Wall
Slide-in ranges are designed to seamlessly fit in the space between two countertops for a centralized cooking area in your kitchen.
However, a slide-in range can sometimes have a gap behind it instead of sitting flush against the kitchen wall. You’ll also notice your stove sticking a little further out than your counter’s edge.
Here are some ways to fill that gap behind your stove: (source: WikiHow)
Small Space Fillers
Some materials are only recommended when the gap between your wall and stove is relatively small.
- Caulk: When the gap is around 6 mm (¼ in), you can use silicone caulk to seal the space. If the gap is wider, you should use other materials to fill it.
- Plastic tubing: This tubing is readily available in any hardware store. Its diameter can range from 12 mm to 25 mm (½ in to 1 in).
To use plastic tubing to fill the gap, wedge it in the space between your stove and the countertop or wall. You’ll want a tube with a wider diameter than the actual gap so it fits snugly in place and doesn’t fall.
A backsplash is the material installed on the wall above a kitchen counter to protect it from splashes. (source: Kitchen Cabinet Kings) These splashes include sink water, spatter from cooking oil, or other fluids used in the kitchen.
Backsplashes are made of materials like ceramic tile and have to be resistant to moisture, liquids, and heat.
However, installing a backsplash behind your slide-in stove may not be the best solution to cover a large gap between the appliance and the wall.
A backsplash is usually meant to follow the surface of the walls beside it. If you install backsplash material over your existing wall, it only sticks out enough to cover a gap if it’s applied right above the height of the stove. Otherwise, a backsplash will just push out your stove even more.
Tiles are usually 6 mm to 19 mm (¼ in to ¾ in) or thick. (source: SF Gate)
Tile adhesive used to stick tiles to the wall only add 1 mm to 2 mm (0.05 in to 0.09 in) to the thickness. (source: Home of Tile) That’s still much less than 25mm (1 in).
This solution is applicable if the gap is around 5 cm (2 inches). The thinner the strip has to be, the higher its chance of cracking or breaking. Pick a material that matches your existing kitchen countertop or theme.
Also, talk to your contractor about this, since experienced professionals can cut granite or marble pretty thin without any problems. They can even install it so the overall look with existing countertops is seamless.
Pre-Made Gap Fillers
The more common stove gap filler is designed for the sides of your range. They’re T-shaped inserts meant to overlap part of your stovetop and kitchen counter — made of silicone, plastic, vinyl, and stainless steel.
For the rear of your stove, there are stainless steel gap fillers that can be rectangle or triangle-shaped.
These fillers are sold with fixing accessories that can be screwed into the wall to secure the filler in the gap. If you choose this solution, measure the gap between your stove and wall to ensure the product you buy is the right size.
The Linda’s Essentials Silicone Stove Gap Covers on Amazon.com are made of flexible silicone, making it easier to cover gaps, especially if there’s a height difference between the countertop and stovetop. Cleaning is also easy because these stove gap covers are dishwasher safe.
You can also go the pre-made or DIY route for the kitchen shelf solution to cover your rear stove gap. Just remember that it would be best to choose a material resistant to fire and liquid splashes.
When you have a gap a few inches wide, you may want to put an additional shelf right above your stove. You can use this to place spices and other small bottles or containers of common ingredients.
The StoveShelf Magnetic Shelf on Amazon.com has magnets to attach this small shelf to your stove without the need for drilling or adhesives. This also comes in different colors to match your appliance or the rest of your kitchen.
Does a Slide-In Range Need a Countertop Behind It?
A countertop isn’t necessary behind a slide-in range. You can fill the gap behind your stove with different materials and solutions, from caulk to pre-made fillers and kitchen shelves. It may take years before you change to a different model, but a countertop may not be a solution to cover a gap.
You’ll have to measure the dimensions of the space in your kitchen and make sure the model you want will fit.
If there’s a model you want that doesn’t fit with the existing countertop, you’ll have to spend a bit more on renovation.
How Big Should the Gap Behind My Stove Be?
The gap behind your stove should be around four centimeters (1.5 inches) so that there is enough room for air to circulate. However, you should also check the space requirements for your specific model. (source: GE Appliances Products)
Sometimes, a gap between the stove and wall results from the gas pipe sticking out from the wall. Older range models have a recessed back to account for this. Meanwhile, newer range models usually have flat backs, hence the wall gap.
Other stoves, like free-standing stoves, don’t need gaps behind them at all and can sit flush with your kitchen wall.
The gap behind a stove can be filled with plastic, silicone, tile, and stainless steel. This gap is usually covered to prevent oil and other food bits from falling into the space.
I hope this article helps you get rid of the annoying (and unhygienic) gap behind your range or stove!
Extra Information About gap behind slide in range That You May Find Interested
If the information we provide above is not enough, you may find more below here.
What To Put in the Gap Behind a Slide-In Range
Gap behind slide in gas range – Houzz
Is there a standard gap behind slide-in ranges? – Houzz
Amazon.com: Slide In Range Rear Filler Kit W10113901A …
Slide in Range Gap Filler – Brushed Stainless Steel Stove …
How Do You Cover Gap Between Stove and Back Wall?
Frequently Asked Questions About gap behind slide in range
If you have questions that need to be answered about the topic gap behind slide in range, then this section may help you solve it.
How much space do you need behind a slide-in range?
about two inches
What do you do with a gap behind a slide-in range?
To cover this gap behind a slide-in range, you can use or install things such as small space fillers (e.g. caulk, plastic tubing), backsplash, countertop, pre-made gap fillers, and a kitchen shelf
How should a slide-in range fit?
Both a slide-in and drop-in style range can give a custom look. A slide-in range will overlap a counter for a true built-in effect. It should fit snug.
Do you need a backsplash with a slide-in range?
Do I need a backsplash behind a slide-in range? Backsplashes are not mandatory, but they are everywhere in today’s modern homes. The controls on a slide-in range are in the front, not on a lip in the back of the range. So, if you install a backsplash, make sure it extends all the way to the base of the countertop.
Does a slide-in range go all the way to the wall?
Slide-in ranges are not installed directly against a wall, sitting a few inches away from it. Because of this, there is usually a few inches of countertop space that wraps around the back of the cooktop.
Can you have a slide-in range against a wall?
Since slide-in ranges do not have backsplash panels, they are ideal for installation in kitchen islands or against a wall that features a continuous backsplash. However, since many of today’s slide-in ranges feature finished sides, you can now install one virtually anywhere in your kitchen.
Should range be level with countertop?
For electric and gas ranges, opt for models that are the same height as your countertop so that the top of the stovetop sits level with the countertops on either side of the range (e.g., a 36-inch-tall range for a 36-inch standard countertop height).
How much is too much on a slide?
Finally, there is the 1-6-6 rule. This rule is very simple. You should include no more than six words per line and no more than six bullet points per slide. They invented this rule to prevent people from using too much text.
How do I fill the gap between my stove and counter?
First, choose a gap cover that matches the style of your kitchen. Stainless steel or black plastic are popular choices. Then, measure the length of the gap and cut the cover to size if necessary. Once the gap cover is the right size, simply slide it into the gap between the stove and the counter.
Why are slide-in ranges more expensive than freestanding?
Slide-in ranges are more expensive than freestanding because of the custom, built-in look the design provides. QuietClose Door – No more slamming the oven door. Dampened hinges softly and quietly guide the QuietClose door shut. It’s premium engineering that you’ll appreciate each time you close your oven.
How much clearance do you need between stove and wall?
The standard clearance recommended by the National Fire Protection Agency is 36 inches. This means that the back of the stove should be 36 inches away from any combustible material, such as woodwork, unprotected walls, furniture and even firewood.
Do slide in ranges overlap the counter?
A true slide-in range needs to be installed between two cabinets. The edges of its cooktop will overlap your countertop by about an inch on each side, which makes it look almost like it’s built into your cabinetry. It also prevents debris and liquid from falling between the stove and the cabinets.
How much space do you need behind a wall oven?
As a rule of thumb, a wall oven requires around 3 inches of room in between your cabinet walls. This gap will enable you to install virtually any standard oven housing unit. It will also help shield the surrounding cabinetry from the oven’s heat.