Food And Drink

Top 10 blendjet troubleshooting That Easy To Do

Below is information and knowledge on the topic blendjet troubleshooting gather and compiled by the monanngon.net team. Along with other related topics like: BlendJet charged but not working, BlendJet not working red light, BlendJet flashing red and blue, BlendJet not charging, BlendJet flashing blue light, BlendJet 2 not charging, BlendJet purple light, BlendJet blue light.


=”video” src=”https://www.youtube.com/embed/SxWniONTTm8″ frameborder=”0″ allow=”accelerometer; autoplay; encrypted-media; gyroscope;” allowfullscreen>
Blendjet isn't working
dJet® – The Next-Gen Blender

Anatomy of Awesome

YOUR FIRST BLEND…

Make whatever you crave, wherever you are. Here’s how:

  1. Charge your BlendJet with the included USB cable for about 1 hour or until the light ring shows a solid blue circle.

  2. Ensure the arrows on the rear of the jar and base are closely aligned.

  3. Clean your BlendJet prior to first use: add water, a drop of soap, blend and rinse. (Deep clean as needed – see “Cleaning” section for details.)

  4. Add liquid first, then throw in your solids. Leave a little room at the top.

  5. Tighten the lid and press the power button to blend for one 20-second cycle. Repeat as needed for thicker blends.

  6. Enjoy your blended creation and clean immediately after each use.


CHARGING

  1. Using the included USB-C cable, you can charge your BlendJet with most USB ports, from your phone charger, to your computer, to the USB port in your car.

  2. Your BlendJet takes about 1.5 hours to fully charge, and lasts for 15+ blends.

  3. The light ring around the power button indicates battery level while charging. As your BlendJet charges, the lights will change from purple to blue. When the light around the power button forms a complete blue circle, your BlendJet is fully charged.

  4. The circle turns purple (instead of blue) while blending or pulsing whenever the battery is getting low.

  5. The circle will flash red and purple when the battery is dead and it’s time to recharge. Do not charge your BlendJet when it’s wet.


A MODE FOR EVERY MOOD

BlendJet 2 has three easy-to-use modes: Blend Mode, Pulse Mode and Lock Mode.


CLEANING

Always clean your BlendJet immediately after each use to prevent food from drying and sticking to the blades. Your BlendJet 2 is water-resistant, so it’s okay if the USB port gets wet, but never put your BlendJet—including the base, jar and lid—in the dishwasher, or submerge it entirely under water. Gently pat the BlendJet logo to dry, or simply let air dry.


IMPORTANT SAFEGUARDS & CAUTIONARY INFORMATION

Please review these precautions carefully before using your BlendJet for the first time.


DOs

Group 2

DO store your BlendJet in a secure place, out of the reach of children.

Group 2

DO operate your BlendJet with the lid securely screwed on.

Group 2

DO use only high-quality USB chargers (like the one that came with your phone) and the included USB-C cable or certified USB-C cables.

Group 2

DO firmly push the USB cable all the way in to charge (do not plug it in partially).

Group 2

DO allow ingredients to settle in your BlendJet before you unscrew the lid after blending.

Group 2

DO take care when handling the base of the blender without the jar attached. As a safety precaution, there are magnets in the jar and base of the blender that must be aligned for BlendJet to work. Magnetic objects can fool the base into thinking that the jar is attached and allow the blades to spin.


DO NOTs

Group 2

DO NOT charge your BlendJet when it’s wet. Use only high-quality USB chargers (like the one that came with your phone) and the included USB-C cable or certified USB-C cables.

Group 2

DO NOT let children use BlendJet unattended. Adult supervision is necessary at all times. Store in a safe place outside of the reach of children.

Group 2

DO NOT put your hands inside your BlendJet or anywhere near the blades. The blades can still spin when the lid is off.

Group 2

DO NOT put your BlendJet in the dishwasher. Your BlendJet is water-resistant, so it’s okay if the USB port gets wet, but NEVER charge when wet, and NEVER submerge it underwater.

Group 2

DO NOT put your BlendJet in a microwave oven or freezer.

Group 2

DO NOT use hot liquids over 120°F / 49°C. This can cause damage to the jar and base, including leaks.

Group 2

DO NOT put anything carbonated in your BlendJet. This may cause pressure to build up in the jar & can result in a mess, possible injury, or damage to the blender (immediately or over time).

Group 2

DO NOT put MCT oil (or powder) in your BlendJet; over time, this can damage the blender.

Group 2

DO NOT let food sit in your BlendJet for prolonged periods. This may lead to fermentation and build pressure in the jar to the point where it bursts, resulting in a mess, damage or possible injury.

Group 2

DO NOT run your BlendJet while it’s empty as this can damage the blender.

Group 2

DO NOT immerse the charging cable in water or other liquids to avoid risk of electric shock.

Group 2

DO NOT allow the charging cable to touch hot surfaces.


;

Extra Information About blendjet troubleshooting That You May Find Interested

If the information we provide above is not enough, you may find more below here.

BlendJet® 2 User Guide

BlendJet® 2 User Guide

  • Author: blendjet.com

  • Rating: 3⭐ (477481 rating)

  • Highest Rate: 5⭐

  • Lowest Rate: 2⭐

  • Sumary: The BlendJet 2 portable blender packs big blender power on the go. It crushes ice or almost anything. It even cleans itself. It’s USB-C rechargeable and water-resistant too. Get your BlendJet 2 today!

  • Matching Result: TROUBLESHOOTING. Flashing Red Light. Jar isn’t aligned with base. Loosen the jar from the base and screw it back in until the arrows on the back of the jar …

  • Intro: Meet BlendJet® – The Next-Gen BlenderAnatomy of AwesomeYOUR FIRST BLEND…Make whatever you crave, wherever you are. Here’s how:Charge your BlendJet with the included USB cable for about 1 hour or until the light ring shows a solid blue circle.Ensure the arrows on the rear of the jar and base are closely aligned.Clean your BlendJet prior to first use: add water, a drop of soap, blend and rinse. (Deep clean as needed – see “Cleaning” section for details.)Add liquid first, then throw in your solids. Leave a little room at the top.Tighten the lid and press the power button to blend…
  • Source: https://blendjet.com/user-guide/blendjet-2

Blendjet Blender Not Working? 6 Main Reasons and 5 Easy ...

Blendjet Blender Not Working? 6 Main Reasons and 5 Easy …

  • Author: tophomeapps.com

  • Rating: 3⭐ (477481 rating)

  • Highest Rate: 5⭐

  • Lowest Rate: 2⭐

  • Sumary: Is your Blendjet not working at all? Then Here are the possible reasons and easy fixes that will save your blender.

  • Matching Result: Causes For Blendjet Blender Not Working · Lack of Charge · Absence of Tightness in Base · Burned out fuse · Dirty Power Terminals · The Motor Has Burned Out · Jammed …

  • Intro: Blendjet Blender Not Working? 6 Main Reasons and 5 Easy Solutions! – Top Home Apps( Disclaimer: As an Amazon Associate, we earn commissions from qualifying purchases at NO additional cost to the customer.)                                          You may want to consider blending your protein shake at night.As soon as you load up healthy items into the blender, press the start button, and you are at stake.Oh! Your Blendjet blender is not working.You have no idea what’s wrong.You look at your wireless appliance, wondering…
  • Source: https://www.tophomeapps.com/blendjet-not-working/

Why is my BlendJet Blinking Red and Purple? Easy Solution

Why is my BlendJet Blinking Red and Purple? Easy Solution

  • Author: techforesta.com

  • Rating: 3⭐ (477481 rating)

  • Highest Rate: 5⭐

  • Lowest Rate: 2⭐

  • Sumary: Quick Answer: Why is my BlendJet Blinking Red and Purple? Easy Fix BlendJet blinking purple and red. Your BlendJet is fully charged when the light

  • Matching Result: The most frequent causes of a portable blender not working are a low battery or an overload. Make sure the portable blender is fully charged …

  • Intro: Why is my BlendJet Blinking Red and Purple? Easy Solution Quick Answer: BlendJet blinking purple and red. Your BlendJet is fully charged when the light surrounding the power button has formed a complete blue circle. When the battery needs to be recharged, the circle will flash red and purple light. When the battery runs low, the circle turns purple (rather than blue) while blending or pulsing. Why is my BlendJet Flashing Red and Blue? BlendJet red and blue flashing light. Your jar isn’t aligned with your base if your Blendjet’s red and blue flashing lights are on. Simply screw your…
  • Source: https://techforesta.com/why-is-my-blendjet-blinking-red-and-purple/

Why Is My Blendjet Blinking Red? Reasons And Fix Guide

Why Is My Blendjet Blinking Red? Reasons And Fix Guide

  • Author: trishdeseine.com

  • Rating: 3⭐ (477481 rating)

  • Highest Rate: 5⭐

  • Lowest Rate: 2⭐

  • Sumary: Are you asking yourself why is my blendjet blinking red? Well there are many reasons that determine and answers why is it blinking red. Read on to learn more!

  • Matching Result: Together with other means that will help you fix each problem associated with them. The blend jet could be blinking red for a number of …

  • Intro: Why Is My Blendjet Blinking Red? – (Easy Fix Guide!) I would really like to know ‘Why is my blendjet blinking red?’. My blend jet is a very vital appliance in my home. For the love of silence and comfort,  it allows me to whip up smoothies into a glass. This tool has made my life awesome for every moment it is used. However, as an electrical and mechanical appliance, the blend jet can become problematic. Its lights started blinking from nowhere, bothering me to the core. It became imperative that one establishes why the blend jet could be blinking…
  • Source: https://trishdeseine.com/why-is-my-blendjet-blinking-red/

Frequently Asked Questions About blendjet troubleshooting

If you have questions that need to be answered about the topic blendjet troubleshooting, then this section may help you solve it.

Why is my BlendJet not working?

As a safety precaution there is a small magnet on the jar and base, which must be aligned, or else the blades won’t spin. Red flashing lights mean your BlendJet needs to be recharged or that your blades are blocked. Recharge or shake your BlendJet, and/or turn it on upside down, then flip it back over while on.

Why is my BlendJet flashing purple and red?

When the light around the power button forms a complete blue circle, your BlendJet is fully charged. The circle turns purple (instead of blue) while blending or pulsing whenever the battery is getting low. The circle will flash red and purple when the battery is dead and it’s time to recharge.

How do I reset my BlendJet?

Just hold the button down for about 3 seconds. Once the light flashes blue 3 times, you’re good to go! You’re always welcome to email support@blendjet.com if you need any more troubleshooting help.

How do I get my BlendJet to work?

In this video00:35It’S Not Fully Charged01:15Check To See if It’S Charged01:33The Arrows Are Not Aligned01:49Blend with the Top Off02:39The Arrows Are Aligned04:45Too Much Inside of Your JarYouTubeVisit

Why did my blender suddenly stopped working?

In most cases it is debris in the blades of the blender that causes jamming. Either try removing the debris or replace the coupling.

How do you fix a blender that is not working?

Step 1: Remove the blender base and locate the fuse in the wire from the multispeed switch to the motor. Step 2: Disconnect the wire and use a continuity tester or multitester to check the fuse. If the circuit is open, the fuse is blown. Step 3: Replace the faulty in-line fuse with one of identical rating.

Why does my blender keep blinking?

All indicator lights are flashing alternately. The Blender may be jammed. If it is jammed, the Blender will stop running to avoid damage to the motor. Press POWER to reset the Blender and unplug the power cord.

Why is my portable blender not spinning?

I had a similar problem, and it was pretty simple to fix. Most of the time when your blender is powered on and the blades will not rotate, it is because you have overfilled the container. Remove some of the food/liquid and try to power on your blender again.

What is the common malfunction of blender?

One of the most common problems with hand blenders is blender not working completely. This could be a result of an issue with the fuse. To check the fuse, you may first need to disassemble the unit till you reach the inner body where the fuse is located.

What is the average lifespan of a blender?

In general, less-powerful blenders will last three to five years, while more expensive models with a powerful motor will last about 10 years. However, how often you use your blender will impact its lifespan.

Video About blendjet troubleshooting

Blendjet isn't working