Food And Drink

Top 10 blendjet flashing red and blue That Easy To Do

Below is information and knowledge on the topic blendjet flashing red and blue gather and compiled by the monanngon.net team. Along with other related topics like: BlendJet flashing red and purple, BlendJet charged but not working, BlendJet flashing red and blue while charging, BlendJet 2 flashing red and purple after charging, BlendJet flashing purple, BlendJet 2 troubleshooting, BlendJet not working, BlendJet blue light.


5 REASONS Why Your BlendJet 2 May Not Be Working …

dJet® – The Next-Gen Blender

Anatomy of Awesome

YOUR FIRST BLEND…

Make whatever you crave, wherever you are. Here’s how:

  1. Charge your BlendJet with the included USB cable for about 1 hour or until the light ring shows a solid blue circle.

  2. Ensure the arrows on the rear of the jar and base are closely aligned.

  3. Clean your BlendJet prior to first use: add water, a drop of soap, blend and rinse. (Deep clean as needed – see “Cleaning” section for details.)

  4. Add liquid first, then throw in your solids. Leave a little room at the top.

  5. Tighten the lid and press the power button to blend for one 20-second cycle. Repeat as needed for thicker blends.

  6. Enjoy your blended creation and clean immediately after each use.


CHARGING

  1. Using the included USB-C cable, you can charge your BlendJet with most USB ports, from your phone charger, to your computer, to the USB port in your car.

  2. Your BlendJet takes about 1.5 hours to fully charge, and lasts for 15+ blends.

  3. The light ring around the power button indicates battery level while charging. As your BlendJet charges, the lights will change from purple to blue. When the light around the power button forms a complete blue circle, your BlendJet is fully charged.

  4. The circle turns purple (instead of blue) while blending or pulsing whenever the battery is getting low.

  5. The circle will flash red and purple when the battery is dead and it’s time to recharge. Do not charge your BlendJet when it’s wet.


A MODE FOR EVERY MOOD

BlendJet 2 has three easy-to-use modes: Blend Mode, Pulse Mode and Lock Mode.


CLEANING

Always clean your BlendJet immediately after each use to prevent food from drying and sticking to the blades. Your BlendJet 2 is water-resistant, so it’s okay if the USB port gets wet, but never put your BlendJet—including the base, jar and lid—in the dishwasher, or submerge it entirely under water. Gently pat the BlendJet logo to dry, or simply let air dry.


IMPORTANT SAFEGUARDS & CAUTIONARY INFORMATION

Please review these precautions carefully before using your BlendJet for the first time.


DOs

Group 2

DO store your BlendJet in a secure place, out of the reach of children.

Group 2

DO operate your BlendJet with the lid securely screwed on.

Group 2

DO use only high-quality USB chargers (like the one that came with your phone) and the included USB-C cable or certified USB-C cables.

Group 2

DO firmly push the USB cable all the way in to charge (do not plug it in partially).

Group 2

DO allow ingredients to settle in your BlendJet before you unscrew the lid after blending.

Group 2

DO take care when handling the base of the blender without the jar attached. As a safety precaution, there are magnets in the jar and base of the blender that must be aligned for BlendJet to work. Magnetic objects can fool the base into thinking that the jar is attached and allow the blades to spin.


DO NOTs

Group 2

DO NOT charge your BlendJet when it’s wet. Use only high-quality USB chargers (like the one that came with your phone) and the included USB-C cable or certified USB-C cables.

Group 2

DO NOT let children use BlendJet unattended. Adult supervision is necessary at all times. Store in a safe place outside of the reach of children.

Group 2

DO NOT put your hands inside your BlendJet or anywhere near the blades. The blades can still spin when the lid is off.

Group 2

DO NOT put your BlendJet in the dishwasher. Your BlendJet is water-resistant, so it’s okay if the USB port gets wet, but NEVER charge when wet, and NEVER submerge it underwater.

Group 2

DO NOT put your BlendJet in a microwave oven or freezer.

Group 2

DO NOT use hot liquids over 120°F / 49°C. This can cause damage to the jar and base, including leaks.

Group 2

DO NOT put anything carbonated in your BlendJet. This may cause pressure to build up in the jar & can result in a mess, possible injury, or damage to the blender (immediately or over time).

Group 2

DO NOT put MCT oil (or powder) in your BlendJet; over time, this can damage the blender.

Group 2

DO NOT let food sit in your BlendJet for prolonged periods. This may lead to fermentation and build pressure in the jar to the point where it bursts, resulting in a mess, damage or possible injury.

Group 2

DO NOT run your BlendJet while it’s empty as this can damage the blender.

Group 2

DO NOT immerse the charging cable in water or other liquids to avoid risk of electric shock.

Group 2

DO NOT allow the charging cable to touch hot surfaces.


;

Extra Information About blendjet flashing red and blue That You May Find Interested

If the information we provide above is not enough, you may find more below here.

BlendJet® 2 User Guide

BlendJet® 2 User Guide

  • Author: blendjet.com

  • Rating: 3⭐ (960186 rating)

  • Highest Rate: 5⭐

  • Lowest Rate: 3⭐

  • Sumary: The BlendJet 2 portable blender packs big blender power on the go. It crushes ice or almost anything. It even cleans itself. It’s USB-C rechargeable and water-resistant too. Get your BlendJet 2 today!

  • Matching Result: The circle will flash red and purple when the battery is dead and it’s time to recharge. Do not charge your BlendJet when it’s wet. A MODE FOR EVERY MOOD.

  • Intro: Meet BlendJet® – The Next-Gen BlenderAnatomy of AwesomeYOUR FIRST BLEND…Make whatever you crave, wherever you are. Here’s how:Charge your BlendJet with the included USB cable for about 1 hour or until the light ring shows a solid blue circle.Ensure the arrows on the rear of the jar and base are closely aligned.Clean your BlendJet prior to first use: add water, a drop of soap, blend and rinse. (Deep clean as needed – see “Cleaning” section for details.)Add liquid first, then throw in your solids. Leave a little room at the top.Tighten the lid and press the power button to blend…
  • Source: https://blendjet.com/user-guide/blendjet-2

Blendjet Blender Not Working? 6 Main Reasons and 5 Easy ...

Blendjet Blender Not Working? 6 Main Reasons and 5 Easy …

  • Author: tophomeapps.com

  • Rating: 3⭐ (960186 rating)

  • Highest Rate: 5⭐

  • Lowest Rate: 3⭐

  • Sumary: Is your Blendjet not working at all? Then Here are the possible reasons and easy fixes that will save your blender.

  • Matching Result: Red and blue flashing lights on your Blendjet mean your jar isn’t aligned with your base. To fix this, simply you need to screw your jar clockwise into the base …

  • Intro: Blendjet Blender Not Working? 6 Main Reasons and 5 Easy Solutions! – Top Home Apps( Disclaimer: As an Amazon Associate, we earn commissions from qualifying purchases at NO additional cost to the customer.)                                          You may want to consider blending your protein shake at night.As soon as you load up healthy items into the blender, press the start button, and you are at stake.Oh! Your Blendjet blender is not working.You have no idea what’s wrong.You look at your wireless appliance, wondering…
  • Source: https://www.tophomeapps.com/blendjet-not-working/

Why is my BlendJet Blinking Red and Purple? Easy Solution

Why is my BlendJet Blinking Red and Purple? Easy Solution

  • Author: techforesta.com

  • Rating: 3⭐ (960186 rating)

  • Highest Rate: 5⭐

  • Lowest Rate: 3⭐

  • Sumary: Quick Answer: Why is my BlendJet Blinking Red and Purple? Easy Fix BlendJet blinking purple and red. Your BlendJet is fully charged when the light

  • Matching Result: BlendJet blinking purple and red. Your BlendJet is fully charged when the light surrounding the power button has formed a complete blue …

  • Intro: Why is my BlendJet Blinking Red and Purple? Easy Solution Quick Answer: BlendJet blinking purple and red. Your BlendJet is fully charged when the light surrounding the power button has formed a complete blue circle. When the battery needs to be recharged, the circle will flash red and purple light. When the battery runs low, the circle turns purple (rather than blue) while blending or pulsing. Why is my BlendJet Flashing Red and Blue? BlendJet red and blue flashing light. Your jar isn’t aligned with your base if your Blendjet’s red and blue flashing lights are on. Simply screw your…
  • Source: https://techforesta.com/why-is-my-blendjet-blinking-red-and-purple/

Why Is My Blendjet Blinking Red? Reasons And Fix Guide

Why Is My Blendjet Blinking Red? Reasons And Fix Guide

  • Author: trishdeseine.com

  • Rating: 3⭐ (960186 rating)

  • Highest Rate: 5⭐

  • Lowest Rate: 3⭐

  • Sumary: Are you asking yourself why is my blendjet blinking red? Well there are many reasons that determine and answers why is it blinking red. Read on to learn more!

  • Matching Result: The complete blue light around the power button shows that the battery is charged completely. · Circle quickly turns from purple to blue, when …

  • Intro: Why Is My Blendjet Blinking Red? – (Easy Fix Guide!) I would really like to know ‘Why is my blendjet blinking red?’. My blend jet is a very vital appliance in my home. For the love of silence and comfort,  it allows me to whip up smoothies into a glass. This tool has made my life awesome for every moment it is used. However, as an electrical and mechanical appliance, the blend jet can become problematic. Its lights started blinking from nowhere, bothering me to the core. It became imperative that one establishes why the blend jet could be blinking…
  • Source: https://trishdeseine.com/why-is-my-blendjet-blinking-red/

Blendjet Flashing Red And Blue (Easy FIX) - Kitchens HQ

Blendjet Flashing Red And Blue (Easy FIX) – Kitchens HQ

  • Author: kitchenshq.com

  • Rating: 3⭐ (960186 rating)

  • Highest Rate: 5⭐

  • Lowest Rate: 3⭐

  • Sumary: Blendjet flashing red and blue lights mean the jar (detachable part) hasn’t aligned with the base. Of course, the blades will not spin if the jar and bottom portion of the Blendjet doesn’t align. That’s how the machine is designed to function. 

  • Matching Result: Blendjet flashing red and blue light is an indication that you didn’t screw the jar into the base properly. In such a case, the blender will not function …

  • Intro: Blendjet Flashing Red And Blue (Easy FIX) | Kitchens HQ Seeing the Blendjet flashing red and blue lights can create panic in most people’s minds. Different thoughts would be running through some people’s heads. The Blendjet is a must-have personal and battery-powered blender. You can make single-serve drinks such as smoothies, shakes, and others with this blender. Another thing that makes this rechargeable blender unique is that it packs so much blend power.  However, if your Blendjet flashes the red and blue light, it simply means something isn’t right with the blender. Here, we’ll discuss why both lights are flashing and…
  • Source: https://kitchenshq.com/blendjet-flashing-red-and-blue/

Why is my BlendJet blinking red and purple? - TechShift.net

Why is my BlendJet blinking red and purple? – TechShift.net

  • Author: techshift.net

  • Rating: 3⭐ (960186 rating)

  • Highest Rate: 5⭐

  • Lowest Rate: 3⭐

  • Sumary: Why is my BlendJet blinking red and purple? When the light around the power button forms a complete blue circle, your BlendJet is fully charged. The circle turns purple (instead of blue) while blending or pulsing whenever the battery is getting low. The circle will flash red and purple when the battery is dead and it’s time to recharge.

  • Matching Result: When the light around the power button forms a complete blue circle, your BlendJet is fully charged. The circle turns purple (instead of …

  • Intro: Why is my BlendJet blinking red and purple? | TechShift.net Why is my BlendJet blinking red and purple?  When the light around the power button forms a complete blue circle, your BlendJet is fully charged. The circle turns purple (instead of blue) while blending or pulsing whenever the battery is getting low. The circle will flash red and purple when the battery is dead and it’s time to recharge. Why is my portable blender not working?  The most common reasons a portable blender will not work are a lack of charge or an overload. Be certain that you have properly…
  • Source: https://techshift.net/why-is-my-blendjet-blinking-red-and-purple/

Customer Questions - Amazon.com

Customer Questions – Amazon.com

  • Author: amazon.com

  • Rating: 3⭐ (960186 rating)

  • Highest Rate: 5⭐

  • Lowest Rate: 3⭐

  • Sumary: It either means it needs to be charged or that the base isn’t tight enough. First try making sure you have the base screwed on tight enough, if it still flashes, then charge it. If it still flashes after that, check the manual that came with it. Hope that helps.

  • Matching Result: The portable smoothie blender blinking red light means it must charge now.A solid red ligh… Petolar. Seller · 5 years ago …

  • Intro: Amazon.com: Customer Questions & Answers It either means it needs to be charged or that the base isn’t tight enough. First try making sure you have the base screwed on tight enough, if it still flashes, then charge it. If it still flashes after that, check the manual that came with it. Hope that helps. Saskia &#183 November 29, 2018 Failed to get answers. See all 4 answers
  • Source: https://www.amazon.com/ask/questions/asin/B0721JD6Q3/

Frequently Asked Questions About blendjet flashing red and blue

If you have questions that need to be answered about the topic blendjet flashing red and blue, then this section may help you solve it.

Why is my BlendJet blinking red and purple?

The circle turns purple (instead of blue) while blending or pulsing whenever the battery is getting low. The circle will flash red and purple when the battery is dead and it’s time to recharge. Do not charge your BlendJet when it’s wet.

How do I reset my BlendJet?

Just hold the button down for about 3 seconds. Once the light flashes blue 3 times, you’re good to go! You’re always welcome to email support@blendjet.com if you need any more troubleshooting help.

Why does my blender keep blinking?

All indicator lights are flashing alternately. The Blender may be jammed. If it is jammed, the Blender will stop running to avoid damage to the motor. Press POWER to reset the Blender and unplug the power cord.

Part of a video titled How To Use Your BlendJet Portable Blender – BlendJet 2 Tips and Tricks

What causes a blender to stop working?

The most common problem is caused by the jar leaking liquids. The solution is to tighten the base. If this doesn’t solve the problem, inspect and, if necessary, replace the gasket. If the drive stud is turning but the blade assembly isn’t, inspect the assembly socket into which the drive stud fits.

Why is my electric blender not working?

Check for power connectivity

You can check for power connectivity if blender not working. This can be checked by first disconnecting the power cord and then test the electrical switch by turning the blender switch to ‘on’ position. Use a multimeter and press the blender’s switches one at a time.

Why is my BlendJet not working?

As a safety precaution there is a small magnet on the jar and base, which must be aligned, or else the blades won’t spin. Red flashing lights mean your BlendJet needs to be recharged or that your blades are blocked. Recharge or shake your BlendJet, and/or turn it on upside down, then flip it back over while on.

What does it mean if your blender is blinking?

When your Ninja blender power light is blinking, that means one or more of its parts are not assembled or secured correctly. First, check that the pitcher is securely locked in the base of the blender. Then, check that the blender lid is also secure and correctly aligned.

Video About blendjet flashing red and blue

5 REASONS Why Your BlendJet 2 May Not Be Working …